Latest gas tight syringe Tenders | Government gas tight syringe Tenders

CTN :45513743

06 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For carbide tipped brazed boring tool shank , carbide tipped brazed rh internal recessing tool , carbide tip brazed boring tool , iso 3 brazed external turning tool , hss tool bit with 10 percentage cobalt size , hss square tool bit s400 grade , brazed t.c tipped tools 156 1616 tool no tip p30 right , brazed t.c tipped tools 156 2525 tool no tip p30 right , brazed parting tools iso 7 r 150 1610 p30 grade , brazed parting off tools iso 7 3220 p30 grade , brazed t.c tipped tools 156 1010 tool no tip p30 right , brazed turning tool iso 2r 2525 tip c20, p30 grade , tap hand ground thread in metric coarse pitch and in set 3 pieces size m3x0.3 or 0.5mm , tap, hand ground thread in metric coarse pitch and in set 3 pieces , tap hand ground thread in metric coarse pitch and in set 3 pieces , inserts trow away spun120308 tn4000 , tin coated carbide turning insert cnmg , coated carbide tpkn1603pdr grade p30 p40 for milling hot die steel wu 20 pm , tungsten carbide inserts tpun 160304 grade , brazed tools turning to shoulder iso9 r1212 shank tip p30 , brazed tools-turning to shoulder iso 9 r1616 shank tip p30 as per annexure , brazed parting tool iso 7 25x16r grade k20 , dnmg150604 inserts , coated carbide insert for machining hardened die steel mat

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

Central Government/Public Sector

CTN :45484374

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of cnc double column vertical machining center , panel cooler ac , coolant system , hydraulic system , pre- dispatch inspection -pdi , installation and commissioning , stabilizer , machine andon light , standard tools and toolbox , hand held air gun , touch probe , set of spares for machine maintatinence , right angle milling head , first fill of lubricating oils,coolant. , document and manuals , test pieces for machining trails , levelling and anchoring materials , packaging and forwarding , tool holders and collets

Central Government/Public Sector

CTN :45484399

19 Jun, 2026 NA

Haridwar - Uttarakhand

Tender For supply of special brazed tools as per bhel drawings c c - goose neck grooving tool , goose neck grooving tool , goose neck gashing tool , tool for skirt machining , tool for skirt machining

CTN :43465033

26 May, 2026 NA

Hyderabad - Telangana

Tender For bid to ras corrigendum : supply of cnc machining inserts : : -dnmg 15 06 04 rough turning , vbmt 16 04 02 finish turning , vbmt 16 04 04 finish turning , 266rg- 16mm01a125m 1125 threading tool , 266rg- 16mm01a175m 1125 threading tool , n123d2-0150-0002- cm 1125 parting tool , c2r-rs25-ld08db grooving tool holder , lever 174 point 3-847m , screw 174 point 3-830 , key 174 point 1-864 , shim 171 point 35-851m

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

Central Government/Public Sector

CTN :45237990

08 Jun, 2026 2.00 Crore

Bangalore - Karnataka

Tender For supply of cnc double column vertical machining center , panel cooler ac , coolant system , hydraulic system , pre- dispatch inspection -pdi , installation and commissioning , stabilizer , machine andon light , standard tools and toolbox , hand held air gun , touch probe , set of spares for machine maintatinence , right angle milling head , first fill of lubricating oils,coolant. , document and manuals , test pieces for machining trails , levelling and anchoring materials , packaging and forwarding , tool holders and collets

Central Government / Public Sector

CTN :45077724

19 May, 2026 NA

Secunderabad - Telangana

Tender For supply of with chip brake geometry and coated inserts for finish under cutting insert of sandvik make vnmg -16 04 08-pf 4415 (or its equivalent) or walter make valenite vnmg -16 04 08 mp3 wpp10s (or its equivalent) or iscar make vnmg -16 04 08 f3p ic 9150 (or its equivalent) suitable to fit in sandvik make dvjnl 3225p16 tool holder and suitable for finish undercut machining of rail axle to obtain surface roughness finish of n4 (rz: 0.8 or ra: 0.2) and emu axle diameter of 184.175 to 184.125mm on hyt make atl machines. [ warranty period: 30 months after the date of delivery ]

CTN :44767533

04 May, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of reaming cutter- id machining tool of size 47.0 mm , reaming cutter- id machining tool of size 46.8 mm , reaming cutter- id machining tool of size 46.5 mm , reaming cutter- id machining tool of size 46.2 mm , reaming cutter- id machining tool of size 45.8 mm , reaming cutter- id machining tool of size 45.5 mm , reaming cutter- id machining tool of size 43.0 mm , reaming cutter- id machining tool of size 42.6 mm , reaming cutter- id machining tool of size 42.2 mm , reaming cutter- id machining tool of size 41.7 mm

CTN :43994951

07 May, 2026 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids.from original equipment manufacturers (oems) and/or authorised channel partners (cps)supply of goods, tools & equipment foran international standard itotin operator advanced machine tools(oamt) tradeat iti suart, gujarat, india - surface grinding machine, cnc machining centre, cnc milling tools for above machine, cnc turn centre, edm, cnc simulator, vertical-spindle five-axis machining centres, cnc tool pre setter, ss and sc centre lathe (all geared) with having minimum specification, universal milling machine with minimum specification, horizontal milling machine with minimum specification, vertical milling machine, universal tool and cutter grinding machine, cnc lathe machine, tool holders to suit the cnc turn centre, jig boring, gear hubber, gear shaper machine, power saw machine-hydraulic feed system, cylindrical grinder, power saw machine, pedestal grinder double end type., radial drill motorized with tapping attachment, drilling machine pillar type with drill chuck & key., slotter, double column planer, shaping machine, shaping machine, co-ordinate measuring machine, cnc wire cut edm (electrical discharge machining), special tools and equipment, involutes gear module, surface plate, marking table, scribing block universal, v-block, combination set, spanner double ended metric, adjustable spanner, reduction sleeve morse taper, angle plate adjustable, oil stone, number drill h.s.s(parallel shank), drill (parallel shank), twist drills, drill chuck, centre drill, grinding wheel dresser(diamond), grinding wheel dresser hunting type, surface grinding machine, cnc machining centre, cnc milling tools for above machine, cnc turn centre, edm, cnc simulator, vertical-spindle five-axis machining centres, cnc tool pre setter, ss and sc centre lathe (all geared) with having minimum specification, universal milling machine with minimum specification, horizontal milling machine with minimum specification, vertical milling machine, universal tool and cutter grinding machine, cnc lathe machine, tool holders to suit the cnc turn centre, jig boring, gear hubber, gear shaper machine, power saw machine-hydraulic feed system, cylindrical grinder, power saw machine, pedestal grinder double end type., radial drill motorized with tapping attachment, drilling machine pillar type with drill chuck & key., slotter, double column planer, shaping machine, shaping machine, co-ordinate measuring machine, cnc wire cut edm (electrical discharge machining), special tools and equipment, involutes gear module, surface plate, marking table, scribing block universal, v-block, combination set, spanner double ended metric, adjustable spanner, reduction sleeve morse taper, angle plate adjustable, oil stone, number drill h.s.s(parallel shank), drill (parallel shank), twist drills, drill chuck, centre drill, grinding wheel dresser(diamond), grinding wheel dresser hunting type

Gas Tight Syringe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government / Public Sector